TM Series Liquid Flow Meters Materials & Performance +/- 0.5% Over 10:1 Turndown & +/- 0.25% Repeatability Flow Rates to 20 GPM (76 lpm) Gland-less Meters with Electronic Registers, Local or Remote 1/4", 3/8", 1/2", 3/4" Models NPT or BSP Ports Standard, 150# RF ANSI Adaptors Optional Anodized Aluminum or Stainless Steel 316 Stainless Steel Shafts PPS Rotors Viton™ or Teflon™ Seals 400 PSI (28 BAR) MWP 1500 PSI (103 BAR) MWP 2500 PSI (172 BAR) MWP Extensive Range of Electronic Signal Conditioners & Controllers Model TM03D Shown Description of Included Models Model Description Link TM03A 3/8" Anodized Aluminum, Nominal 0.3-3 GPM (1.1-11.4 lpm) Data Sheet TM04A ½" Anodized Aluminum, Nominal 1-10 GPM (3.8-38 lpm) Data Sheet TM06A ¾" Anodized Aluminum, Nominal 2-20 GPM (7.6-76 lpm) Data Sheet TM06C ¾" 303 Stainless Steel, Nominal 2-20 GPM (7.6-76 lpm) Data Sheet TM02D ¼" 316 Stainless Steel, Nominal 0.03-0.3 GPM (0.1-1.1 lpm) Data Sheet TM03D 3/8" 316 Stainless Steel, Nominal 0.3-3 GPM (1.1-11.4 lpm) Data Sheet TM04D ½" 316 Stainless Steel, Nominal 1-10 GPM (3.8-38 lpm) Data Sheet TM06D ¾" 316 Stainless Steel, Nominal 2-20 GPM (7.6-76 lpm) Data Sheet (Coming Soon) Above shows meter model numbers. For ordering purposes both an assembly number and various option identifiers must be added. Please consult with your distributor for complete part numbers. TM Part Number Breakdown Tuthill TM Series Assembly Options Available Options & Accessories Options and accessores available with TS Series meters can best be understood by referring to the TUTHILL TM Series assembly options chart. When selecting a flow meter with electronic register, the register is usually specified as a separate item from the flow meter. Please consult with your distributor for complete details. Repair & Maintenance Refer to the Installation & Maintenance Manual supplied with each flow meter. For installation & calibration assistance, please contact your distributor.