NTEP Approved TS Series NTEP Approved (+/- 0.175% Over 5:1 Turndown & +/- 0.05% Repeatability) Flow Rates to 200 GPM (760 lpm) Mechanical or Electronic Registers with Optional Preset & Printing Functions 1", 1½", 2", & 3" Models (All Sizes Are Not Approved in Every Market or With Every Option) Companion Flanges Standard, 150# RF ANSI Adaptors Optional Anodized Aluminum or Stainless Steel 316 Stainless Steel Shafts PPS Rotors with Carbon or Teflon™ Bearings Viton™ or Teflon™ Seals 400 PSI (28 BAR) MWP with Electronic Register 150 PSI (10.5 BAR) MWP with Mechanical Register Complete Range of Accessories Strainer, Air Eliminator & Air Check Valve for Refined Petroleum Products Strainer, Vapor Eliminator & Differential Valve for LPG Service Mechanical Preset Valve with Linkage 1-State & 2-Stage Solenoid Valve Model TS20AV17 Shown Description of Included Models All models shown are approved in the US; refer to NTEP certificate for capacity & liquid categories. All models shown are approved in the US; refer to NTEP certificate for capacity & liquid categories. Model Description Link TS10A 1" Anodized Aluminum, Nominal 8-40 GPM (30-150 lpm) Data Sheet TS15A 1½" Anodized Aluminum, Nominal 12-60 GPM (45-230 lpm) Data Sheet TS20A 2" Anodized Aluminum, Nominal 20-150 GPM (75-570 lpm) Data Sheet TS30A 3" Anodized Aluminum, Nominal 40-200 GPM (150-760 lpm) Data Sheet TS10C 1" 303 Stainless Steel, Nominal 8-40 GPM (30-150 lpm) Data Sheet TS10D 1" 316 Stainless Steel, Nominal 8-40 GPM (30-150 lpm) Data Sheet (Coming Soon) TS15C 1½" 316 Stainless Steel, Nominal 12-60 GPM (45-230 lpm) Data Sheet TS20C 2" 316 Stainless Steel, Nominal 20-100 GPM (75-380 lpm) Data Sheet TS30C 3" 316 Stainless Steel, Nominal 40-200 GPM (150-760 lpm) Data Sheet Above shows meter model numbers. For ordering purposes both an assembly number and various option identifiers must be added. Please consult with your distributor for complete part numbers. TS Part Number Breakdown Tuthill TS Series Assembly Options Safety & Certification Listings Certifying Organization Organization Certificate NTEP National Conference on Weights & Measures, US 99-210A5   Measurement Canada AV-2460   National Weights & Measures Laboratory, UK UK04-2702   National Standards Commission, Australia 5/6B/202 Type approvals for flow meters are liquid specific and vary from country to country. Please refer to relevant certificates to determine whether a given model is approved where you want to use it. If not, you may be able to obtain a spot approval locally. Available Options & Accessories Options and accessores available with TS Series meters can best be understood by referring to the TUTHILL TS Series assembly options chart. When selecting a flow meter with electronic register, the register is usually specified as a separate item from the flow meter. Please consult with your distributor for complete details. Repair & Maintenance Refer to the Installation & Maintenance Manual supplied with each flow meter. For installation & calibration assistance, please contact your distributor.