Filter / Separators to Remove Large Amounts of Liquids and Particulates

When high dirt loads or large volumes of liquids are expected ask for a P-Series Horizontal Filter/Separator. These units are designed to remove slugs of water and oil, liquid droplets and solid particles in a two stage process.

P-Series Diagragm

First the gas stream enters an enlarged chamber where slugs of liquid are immediately caught and drained away to a holding tank. In this same chamber the gas passes through numerous replaceable filter tubes where all dirt particles 1-micron and larger are trapped on the tube's surfaces.

These tubes act to coalesce small droplets and liquid mists into much larger drops which then pass into the second-stage demisting vanes. This demisting section removes these drops, draining them into a second holding tank.

The holding tanks can be equipped with automatic level sensors which pneumatically operate drain valves to remove the liquids as fast as they are being produced.

These filters are available in pressure ratings of 180, 285, 740 and 1480 psi, with line sizes from 2" to 12".

P-Series